200X Fan Action Figure Line

**Sky Breaker** · May 11, 2011, 05:22pm

This is a sign up thread to show harold support for his line of 3D fan created prints. If enough interested in generated, we might be seeing these highly detailed, beautiful pieces in an affordable format in the near future! If you would seriously considering buying his pieces, let him know here, and spread the word about the awesome figures he is currently producing

So if you felt robbed by the ending of the 200X line, you crave unique and limited pieces no one else has, or you're crazy about MOTU in a way that Mattel just can't identify with, you need to get on it and show your support.

If you have been living under a rock, here is a list of the MOTU/fan characters he has created so far complete with photos of the finished product:

Evil Seed
Calix
Sawnado
200X Horde Wizard
Modulok
Repta
Catra's Warrior
Caught-In-Mouth
Hordor
Fang Man

**TechTrek** · May 11, 2011, 05:33pm

i would get caughten mouth, and a calix, that would be it for me though.

**Rich** · May 11, 2011, 05:41pm

These custom figures are amazing. I would buy one of each from Harold.

**bobtheodd** · May 11, 2011, 06:13pm

I would pick up almost all if they could be produced a little cheaper, in a $30-$50 range, more like the line of kits that Royalt1us made. No way I could afford to pay for the 3D prints.

**TrimmTrabb** · May 11, 2011, 10:01pm

Depending upon how the 3D print turns out, I'd probably be interested in his Fang Man.

**Sky Breaker** · May 11, 2011, 11:52pm

Thanks for the support guys! You certainly do not have to sign up for all of them, but its nice to see that there is a growing demand.

Yes the 3D prints run high, but maybe with enough support, something good can come from it. So lets give him a good reason. Perhaps success could lead to your favorite fan character from Royalt's contests make it to figure form. RoyalT gave us an awesome 5 years of wonderful pieces, and now harold is doing the same level of work, just in a different format.

harold is a great guy to talk to, and he loves fan work enough to undertake this huge expense. Be sure to pass the info along to fellow orgers and friends that might want one.

**DJ Force** · May 12, 2011, 03:47am

At a reasonable pricepoint, I´d be interested in:

Evil Seed
Calix
200X Horde Wizard (2x)
Modulok

**Sky Breaker** · May 13, 2011, 12:00pm

Originally Posted by DJ Force

At a reasonable pricepoint, I´d be interested in:

Evil Seed
Calix
200X Horde Wizard (2x)
Modulok

Just two wizards? In order to be cartoon accurate, you would need 3!

I'm debating getting them myself... but once I sink my teeth in, I could be hooked.

**DJ Force** · May 13, 2011, 01:35pm

Originally Posted by Sky Breaker

Just two wizards? In order to be cartoon accurate, you would need 3!

I'm debating getting them myself... but once I sink my teeth in, I could be hooked.

Ah, then 3 of course!

**Eterniandreams** · May 13, 2011, 03:25pm

I am interested, but Harold knows that.

**Braveheart** · May 15, 2011, 09:26am

I'd definitely be interested In most

**oICEMANo** · May 15, 2011, 03:41pm

How could I not want one of my own creations in staction form!

**Faceless One** · May 16, 2011, 03:46am

If they will end up at something like 25-35 $ I will be interested in Calix and Horde Wizard. The problem for me is that I will want to articulate them, so I will at least hope that the resin is not too hard to cut.

**air23cnhit** · May 16, 2011, 07:27am

Depending on the price, I would be interested. Also, I take it the would not come painted?

**dark knight** · May 16, 2011, 08:04am

harold knows that i want all the filmation, vintage ones and some 200x too ! hehe

**DJ Force** · May 16, 2011, 08:28am

So, what hypothetical pricepoint would we be talking about?

**djblizzard** · May 16, 2011, 09:42am

I'm totally down for a Modulok!

**Sky Breaker** · May 16, 2011, 01:44pm

Originally Posted by DJ Force

So, what hypothetical pricepoint would we be talking about?

Somewhere in an affordable range. I can't speak for harold, but I know he is going to offer them at a very reasonable price so that fans can have them.

I can't talk in detail of dollars, or else this thread might get deleted again. Price also depends on what he can sell. The more people the buy, the more he can keep it going, and the better pricing he can offer. So get your friends up on this and keep the excitement building.

**nickmileski** · May 16, 2011, 03:48pm

I'd take Hordor and Horde Wizard if they are made.

**Sky Breaker** · May 17, 2011, 01:23pm

Originally Posted by nickmileski

I'd take Hordor and Horde Wizard if they are made.

You know you want 3 Horde Wizards... or you won't be able to open the portal to Despondos!

**TekkamanSol** · May 17, 2011, 10:53pm

I would be down

**Sky Breaker** · May 18, 2011, 01:57am

I'm getting Evil Seed because the 200X line needed him, and we didn't get him. Calix, just because he has grown on me. Modulok because, well, he is Modulok, and the 3D print version is a nice update.

I also want Sawnado because he is awesome. gbagok outdid himself with this little fan creation. He is going to be make Sy-Klone cower in a corner.

Caught-In-Mouth to bolster my Snakemen ranks, and Hordor, because he is going to be my own little Horde Prime.

Originally Posted by air23cnhit

Depending on the price, I would be interested. Also, I take it the would not come painted?

No they will not be painted... which makes them even more awesome! Project!

**Neo** · May 18, 2011, 05:45am

Originally Posted by Sky Breaker

Somewhere in an affordable range. I can't speak for harold, but I know he is going to offer them at a very reasonable price so that fans can have them.

I can't talk in detail of dollars, or else this thread might get deleted again. Price also depends on what he can sell. The more people the buy, the more he can keep it going, and the better pricing he can offer. So get your friends up on this and keep the excitement building.

I happen to know a bit about 3D printing since I have been using it myself.
If Harold will be making casts of the 3D prints you have to keep in mind that it's probably best to print it in the material that alows the highest amount of detail. The material Harold is using currently using causes a lot of loss in detail. The detailed material is a lot more expencive though.

Also if the models can be broken up into several parts before printing it'll make it easier to make molds and it lets you add more polygons thus more detail.

**oICEMANo** · May 18, 2011, 06:54am

Originally Posted by Sky Breaker

I also want Sawnado because he is awesome. gbagok outdid himself with this little fan creation. He is going to be make Sy-Klone cower in a corner.

Sawnado is all me buddy. But thanks all the same.

**Sky Breaker** · May 18, 2011, 12:22pm

Originally Posted by Neo

I happen to know a bit about 3D printing since I have been using it myself.
If Harold will be making casts of the 3D prints you have to keep in mind that it's probably best to print it in the material that alows the highest amount of detail. The material Harold is using currently using causes a lot of loss in detail. The detailed material is a lot more expencive though.

Also if the models can be broken up into several parts before printing it'll make it easier to make molds and it lets you add more polygons thus more detail.

Really? Wow. I thought the details were pretty good... Hmm.

Thread: 200X Fan Action Figure Line

Thread Tools

Search Thread

Display

200X Fan Action Figure Line

Posting Permissions